Photo Source : ideathrift.com

It’s the middle of summer and you’re by the pool. You take your phone out to snap a quick selfie and accidentally drop it in the water. Now what? If you’re like most people, you panic. But don’t worry, we’re here to help. In this complete guide, we’ll show you how to get water out of

Why Would My Phone Speakers Have Water?

Photo Source : hookeaudio.com

There are a few reasons why your phone’s speakers might have water in them. One possibility is that the device got wet accidentally, perhaps from being in a puddle or rainstorm. Another possibility is that water got into the speaker openings while the phone was being used in the shower or pool. Whatever the reason, getting water out of phone speakers is essential to ensure that the device continues to work properly.

The good news is that there are a few simple methods that can be used to get rid of water in phone speakers. In most cases, all you’ll need is a hairdryer and a bit of patience. So, if your phone’s speakers have been sounding a bit wet recently, read on to learn how to get rid of the water and restore them to their former glory.

Different Methods How To Get Water Out Of Phone Speakers

Photo Source : hookeaudio.com

Using a hairdryer

Photo Source : hookeaudio.com

One of the most popular methods for getting water out of your phone speakers is to use a hairdryer. This method is effective because the heat from the hair dryer will help to evaporate any water that is trapped in the speaker.

To use this method, simply turn on your hairdryer and hold it close to the speaker for a few minutes. Make sure that you do not hold the hairdryer too close to the speaker, as this can damage the speaker.

After a few minutes, turn off the hairdryer and check to see if any water has been removed from the speaker. If there is still water in the speaker, repeat this process until all of the water has been removed.

Using a vacuum cleaner

If you have a vacuum cleaner handy, you can try using it to remove the water from your phone speakers. Just make sure that the vacuum cleaner is turned off before you start. You’ll also want to be careful not to get too close to the speaker with the vacuum cleaner, as you don’t want to damage it. Once you’ve vacuumed up as much water as you can, you can try using a hairdryer on the low setting to remove any residual moisture.

Using rice

Another popular method for removing water from phone speakers is to use rice. Simply place your phone in a bowl of rice and leave it there for a few hours (overnight is even better). The rice will absorb the moisture from the phone, and hopefully, your speakers will be working again by the morning.

Using a desiccant packet

If you have a desiccant packet (often used to keep electronics dry when stored), you can try using it to remove the water from your phone speakers. Simply open the packet and place it near the speaker (but not so close that it could come into contact with the electronics) for 24 hours. The water should be drawn out of the phone by the desiccant.

Using a silica gel packet

If you have a silica gel packet, you can try using it to remove the water from your phone speakers. Remember, a silica gel packet is not the same as a desiccant packet (which is often used to keep electronics dry when stored). A silica gel packet will absorb the water, rather than just drawing it out.

To use this method, simply place the silica gel packet near the speaker (but not so close that it could come into contact with the electronics) for 24 hours. The water should be absorbed by the silica gel, and your phone should be dry by the end of that time.

Using alcohol

If you have some rubbing alcohol (isopropyl alcohol) on hand, you can try using it to remove the water from your phone speakers. Simply apply a small amount of alcohol to a cotton swab and wipe it over the speaker. The alcohol will help to evaporate any water that is trapped in the speaker.

Wiping down the speaker with a cloth

If you don’t have any of the above materials on hand, you can try simply wiping down the speaker with a dry cloth. This won’t remove all of the water from the speaker, but it will help to remove any surface moisture.

If you’re having trouble removing all of the water from your phone speakers, you can always take it to a professional who will be able to help you get rid of the water for good.

Final Thoughts

Now that you know how to get water out of your phone speakers, it’s time to put this knowledge to use. The next time you’re caught in the rain or taking a dip in the pool, don’t panic. Just follow these simple steps and you’ll be able to rescue your device.

Do you have any other tips for getting water out of phone speakers? Share them in the comments below!